Safety ropes are an important measure to protect personal safety. Every time you use safety ropes, you should carry out corresponding tests. Then, what are the methods of safety rope detection? The following is a brief introduction to the safety rope detection brought by the construction network for reference.
Safety rope detection method:
(1)The safety rope should be hung low and low, pay attention to prevent the swing collision. For the use of long ropes of more than 3 m, buffers should be added, except for the slings used for self-locking hooks.
(2)Buffers, differential devices and self-locking hooks can be used in series.
(3)It is not allowed to knot the rope. It is also not allowed to hang the hook directly on the safety rope and should be hung on the connecting ring.
(4)The various components on the safety rope must not be removed arbitrarily. Pay attention to the rope cover when replacing the new rope.
(5)After two years of use of the safety rope, the inspection will be carried out according to the quantity purchase. The fence is subjected to a static load test and stretched by 5 mm at 2206 N. If it is not broken, it can be used continuously. When the safety rope impact test is suspended, the free fall test is carried out with a weight of 80 kg. If it is not broken, the safety rope can be used continuously. For the sampled tape, the safety rope must be replaced before continuing to use.
(6)When using frequent ropes, it is necessary to perform visual inspection frequently. When abnormalities are found, the new ropes should be replaced immediately. The tape is used for 3 to 5 years, and abnormalities should be scrapped in advance.
